综合久久婷婷综合久久,欧美s码亚洲码精品m码,亚洲日本韩国欧美云霸高清,在线天堂中文新版www,日本中文字幕在线播放

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	9.6	g/10min	ASTM D 1238
溫度(Temperature)	250	°C	-
負載(Load)	5	kg	-
模具收縮(Mold Shrinkage) (MD)	0.0014	mm/mm	ASTM D 955
模具收縮(Mold Shrinkage) (TD)	0.0013	mm/mm	ASTM D 955
密度(Density) (73°F)	1340	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	8	cm3/10min	ISO 1133
溫度(Temperature)	250	°C	ISO 1133
負載(Load)	5	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2200	MPa	ISO 527-1/-2
屈服應力(Yield stress)	50	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5	%	ISO 527-1/-2
破壞時應變(Stress at break)	40	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	30	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	40	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	20	kJ/m2	ISO 179/1eA
懸臂梁式沖擊切口 (23°C)	40	kJ/m2	ISO 180/1A
懸臂梁式沖擊切口	15	kJ/m2	ISO 180/1A
溫度(Temperature)	-30	°C	ISO 180/1A
懸臂梁式沖擊無切口(Izod Impact unnotched) (23°C)	N	kJ/m2	ISO 180/1U
洛氏硬度(Rockwell hardness)	R 115	-	ISO 2039-2
球壓痕硬度(Ball indentation hardness)	115	MPa	ISO 2039-1
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	2000	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	50	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Break	40	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	5	%	ASTM D 638
斷裂伸長率(Elongation at Break)	30	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2100	MPa	ASTM D 790
Taber Abrasion Resistance	33	mg/1000 cycles	ASTM D 1044
懸臂梁式沖擊切口 (1/8 in)	0.5	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.15	kJ/m	ASTM D 256
溫度(Temperature)	-30	°C	ASTM D 256
懸臂梁式沖擊無切口(Izod Impact unnotched) (1/8 in)	N	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	85	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	135	°C	ISO 75-1/-2
Vicat softening temperature A	180	°C	ISO 306
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	145	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	100	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	100	E-6/K	ISO 11359-1/-2
Burning behav. 5V at thickness h	5VA	class	IEC 60695-11-20
厚度測試(Thickness tested)	2.5	mm	IEC 60695-11-20
Oxygen index	30	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	V-0	-	UL 94
厚度測試(Thickness tested)	0.75	mm	-
DTUL @ 66 psi	130	°C	ASTM D 648
DTUL @ 264 psi	85	°C	ASTM D 648
Vicat 溫度(Temperature)	145	°C	ASTM D 1525

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	2.9	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	70	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	26	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	225	-	IEC 60112
ASTM數據(ASTM Data)
體積電阻率(Volume Resistivity)	>1E15	Ohm*cm	ASTM D 257
耐電弧性(Arc Resistance)	90	s	ASTM D 495

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.15	%	Sim. to ISO 62
密度(Density)	1340	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsFlame retardant, High impact or impact modifiedRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .

Valox 357X|(PBT+PC)|沙特基礎