欧美日韩v,老司机久久99久久精品播放免费,日韩中文字幕高清有码,91亚洲免费视频,理论片午午伦夜理片影院99

Product TextsVery easy flowing grade for heat-resistant coatings on paper and board as well as for the production of monofilaments and bristles. Also for injection molding applications that call for high flowability.014	mm/mm	ASTM D 955
密度(Density) (73°F)	1300	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	45	cm3/10min	ISO 1133
溫度(Temperature)	250	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	1.6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.9	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2500	MPa	ISO 527-1/-2
屈服應力(Yield stress)	57	MPa	ISO 527-1/-2
屈服應變(Yield strain)	3.7	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	35	%	ISO 527-1/-2
Tensile creep modulus (1h)	1500	MPa	ISO 899-1
Tensile creep modulus (1000h)	1100	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	250	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	6	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	4	kJ/m2	ISO 179/1eA
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	2482.11	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	60	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	3.7	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2213.21	MPa	ASTM D 790

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	223	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	65	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	165	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	145	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.4	mm	IEC 60695-11-10
ASTM數據(ASTM Data)
DTUL @ 66 psi	164	°C	ASTM D 648
DTUL @ 264 psi	67.2	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	223	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.3	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.3	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	13	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E13	Ohm	IEC 60093
電氣強度(Electric strength)	40	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	500	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.5	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.25	%	Sim. to ISO 62
密度(Density)	1300	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	107	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
噴射溫度(Ejection temperature)	160	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	260	°C	ISO 294
Injection Molding, mold temperature	60	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

DiagramsV. stabilized or stable to weather, Heat stabilized or stable to heatEcological valuationFood approval FDA 21 CFRRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING allowed water content: .04 % ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]

Ultradur? B 2550|PBT|BASF