精品中文人妻在线不卡,97人妻免费碰视频碰免,国产mv在线天堂mv免费观看,国产成人精彩在线视频50,日韩有码中文字幕国产

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	14	g/10min	ASTM D 1238
模具收縮(Mold Shrinkage) (MD)	0.017	mm/mm	ASTM D 955
模具收縮(Mold Shrinkage) (TD)	0.015	mm/mm	ASTM D 955
密度(Density) (73°F)	1180	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	12.7	cm3/10min	ISO 1133
溫度(Temperature)	240	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	1.2	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.3	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	14	g/10min	ISO 1133
MFI溫度(MFI temperature)	240	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
屈服應力(Yield stress)	10	MPa	ISO 527-1/-2
屈服應變(Yield strain)	40	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
破壞時應變(Stress at break)	35	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N	kJ/m2	ISO 179/1eU
彎曲彈性模量(Flexural modulus) (23°C)	500	MPa	ISO 178
Stress at 10% elongation	13	MPa	ISO 527-1/-2
Shore D hardness (15s)	50	-	ISO 868
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Break	26	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	510	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	500	MPa	ASTM D 790
Shore D Hardness	55	-	ASTM D 2240
懸臂梁式?jīng)_擊切口 (1/8 in)	N	kJ/m	ASTM D 256
懸臂梁式?jīng)_擊切口 (Low-溫度(Temperature))	N	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	223	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	-60	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	40	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	50	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	137	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	197	E-6/K	ISO 11359-1/-2
ASTM數據(ASTM Data)
DTUL @ 66 psi	55	°C	ASTM D 648
DTUL @ 264 psi	45	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	223	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	4.4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	225	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	5E14	Ohm	IEC 60093
電氣強度(Electric strength)	20	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.6	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1180	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPellets, BlackSpecial CharacteristicsHigh impact or impact modifiedFeaturesCreep ResistanceChemical ResistanceOxidation ResistanceApplicationsAutomotiveRegional Availability .

Hytrel? DYM500BK|(TPC+PBT)-CD|DuPont