亚洲欧洲精品国产二码 ,欧美激情综合色综合啪啪五月,免费a级毛片18以上观看精品,免费的特黄特色大片,超清无码一区二区三区

Product TextsCommon features of Crastin? thermoplastic polyester resin include mechanical and physical properties such as stiffness and toughness, heat resistance, friction and wear resistance, excellent surface finishes and good colourability. Crastin? thermoplastic polyester resin has excellent electrical insulation characteristics and high arc-resistant grades are available. Many flame retardant grades have UL 識別(recognition) (class V-0). Crastin? thermoplastic polyester resin typically has high chemical aFor disposal, local regulations have to be observed.004	mm/mm	ASTM D 955
模具收縮(Mold Shrinkage) (TD)	0.011	mm/mm	ASTM D 955
密度(Density) (73°F)	1450	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	15	cm3/10min	ISO 1133
溫度(Temperature)	250	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.3	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.1	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	7100	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	120	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3.2	%	ISO 527-1/-2
Tensile creep modulus (1h)	7200	MPa	ISO 899-1
Tensile creep modulus (1000h)	5600	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	56	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	54	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8.2	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	9.8	kJ/m2	ISO 179/1eA
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	7481.97	MPa	ASTM D 638
抗拉強度(Tensile Strength)	117	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	3.3	%	ASTM D 638
抗壓強度(Compressive Strength)	161	MPa	ASTM D 695
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	6137	MPa	ASTM D 790
抗彎強度(Flexural Strength)	179	MPa	ASTM D 790
懸臂梁式沖擊切口 (1/8 in)	0.069	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.064	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	225	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	205	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (8.00 MPa)	93	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	210	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	40	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	90	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	19	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	0.75	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	40	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	100	E-6/K	ASTM D 696
DTUL @ 66 psi	220	°C	ASTM D 648
DTUL @ 264 psi	203	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	225	°C	ASTM D 3418
極限氧指數(Limiting 氧指數(Oxygen Index))	19	%	ASTM D 2863

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4.2	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.6	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	20	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	190	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E15	Ohm	IEC 60093
電氣強度(Electric strength)	29	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	400	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	22	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.019	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.6	-	ASTM D 150
表面電阻率(Surface Resistivity)	1.60E13	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	>1E15	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.4	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.15	%	Sim. to ISO 62
密度(Density)	1450	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1260	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.25	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1860	J/(kg K)	-
噴射溫度(Ejection temperature)	170	°C	-

Diagrams ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

Crastin? SK603 NC010|PBT-GF20|DuPont