无码一级视频在线,秋霞无码久久久精品,亚洲国产日韩欧美一区二区三区,五月丁香六月综合缴清无码,夜爽8888视频在线观看

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
成型收縮(Molding shrinkage) (parallel)	1.2 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	0.9 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2200 / 1100	MPa	ISO 527-1/-2
屈服應力(Yield stress)	63 / 43	MPa	ISO 527-1/-2
屈服應變(Yield strain)	6 / 26	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	35 / >50	%	ISO 527-1/-2
Tensile creep modulus (1h)	* / 950	MPa	ISO 899-1
Tensile creep modulus (1000h)	* / 840	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	18 / 25	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	15 / 6	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	66 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	150 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	210 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	130 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	130 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
Oxygen index	19 / *	%	ISO 4589-1/-2

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.2 / 7	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	2.9 / 3.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	200 / 1500	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	200 / 500	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13 / 1E11	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E15	Ohm	IEC 60093
電氣強度(Electric strength)	34 / -	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / -	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	7 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	2.2 / *	%	Sim. to ISO 62
密度(Density)	1090 / -	kg/m3	ISO 1183

Film Properties	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Strain at yield (parallel)	6 / *	%	ISO 527-3

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	150 / *	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	950	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.16	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2600	J/(kg K)	-

CharacteristicsProcessingInjection Molding, Profile ExtrusionDelivery formPelletsAdditivesRelease agentSpecial CharacteristicsHigh impact or impact modifiedRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING .

Zytel? FG408L NC010|PA66-I|DuPont