久久精品丝袜高跟鞋,久久精品国产亚洲av热一区,久久精品国产久精国产,国产99在线

Ultramid? A3Z|PA66-I|BASF

Ultramid? A3Z|PA66-I|BASF 物性表: Ultramid? A3Z|PA66-I|BASF物性表及特性介紹,Ultramid? A3Z|PA66-I|BASF注塑參數詳情,如需Ultramid? A3Z|PA66-I|BASF下載, 可到相關下載區下載

Product TextsAn impact-modified and stabilized injection moulding grade for components and housings with good low temperature impact resistance.

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	38 / *	cm3/10min	ISO 1133
溫度(Temperature)	275 / *	°C	ISO 1133
負載(Load)	10 / *	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	1900 / 850	MPa	ISO 527-1/-2
屈服應力(Yield stress)	48 / 40	MPa	ISO 527-1/-2
屈服應變(Yield strain)	5 / 18	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	45 / >50	%	ISO 527-1/-2
Tensile creep modulus (1000h)	* / 450	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	90 / N	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	31 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	60 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	125 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	85 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.1 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.1 / 3.6	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	160 / 700	E-4	IEC 60250
體積電阻率(Volume resistivity)	4E12 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E12	Ohm	IEC 60093
相比漏電起痕指數(Comparative tracking index)	- / 600	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	7.2 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	2.3 / *	%	Sim. to ISO 62
密度(Density)	1060 / -	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	290	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

Diagrams allowed water content: .15 % ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-82646.html

免責聲明: 本文 Ultramid? A3Z|PA66-I|BASF 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡