国产va免费精品观看,秋霞电影网,人妻少妇看a偷人无码,国产蜜臀在线一区二区三区,欧美中文字幕在线看

Product TextsGlass fibre reinforced injection moulding grade for machinery components and housings of high stiffness and dimensional stability such as coil formers and bearing cages. Also used for electrically insulating parts.

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	50 / *	cm3/10min	ISO 1133
溫度(Temperature)	275 / *	°C	ISO 1133
負載(Load)	5 / *	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	0.5 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.1 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	8600 / 6500	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	175 / 120	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3 / 6	%	ISO 527-1/-2
Tensile creep modulus (1000h)	* / 4300	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	65 / 90	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	55 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	12 / 18	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	9 / -	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	245 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	250 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	250 / *	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	30 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	65 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
Oxygen index	24 / *	%	ISO 4589-1/-2

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.5 / 5.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	140 / 3000	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	140 / 1600	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
電氣強度(Electric strength)	40 / 37	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	- / 550	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	6 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	1.9 / *	%	Sim. to ISO 62
密度(Density)	1320 / -	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
粘數(Viscosity number)	145 / *	cm3/g	ISO 307, 1157, 1628

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
噴射溫度(Ejection temperature)	195	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	290	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294

Diagrams allowed water content: .15 % ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

Ultramid? A3EG5|PA66-GF25|BASF