国产在线中文字幕精品,无码专区一va亚洲v专区在线,性夜黄a爽影免费看,亚洲日韩在线中文字幕第一页 ,狠狠色噜噜狠狠狠狠2021

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
模具收縮(Mold Shrinkage) (MD)	0.0055	mm/mm	ASTM D 955
密度(Density) (73°F)	1240	kg/m3	ASTM D 792
吸水率(Water Absorption) (Equilibrium)	7	%	ASTM D 570

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	70 / *	cm3/10min	ISO 1133
溫度(Temperature)	275 / *	°C	ISO 1133
負載(Load)	5 / *	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	6000 / 4500	MPa	ISO 527-1/-2
屈服應力(Yield stress)	130 / 85	MPa	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	3 / 10	%	ISO 527-1/-2
Tensile creep modulus (1000h)	* / 2500	MPa	ISO 899-1
簡支梁沖擊強度(Charpy impact strength) (+23°C)	45 / 70	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	43 / -	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8 / 11	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	7 / -	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	5500 / 4000	MPa	ISO 178
懸臂梁式?jīng)_擊切口 (23°C)	5.5 / 6.5	kJ/m2	ISO 180/1A
球壓痕硬度(Ball indentation hardness)	200 / 150	MPa	ISO 2039-1
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Break	114	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	3	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	5170	MPa	ASTM D 790
懸臂梁式?jīng)_擊切口 (1/8 in)	0.059	kJ/m	ASTM D 256
懸臂梁式?jīng)_擊切口 (Low-溫度(Temperature))	0.053	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	260 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	250 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	250 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	32 / *	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	75 / *	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	1.5	mm	-
DTUL @ 66 psi	250	°C	ASTM D 648
DTUL @ 264 psi	250	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	260	°C	ASTM D 3418

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	3.5 / 5.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	140 / 1600	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13 / 1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E10	Ohm	IEC 60093
相比漏電起痕指數(Comparative tracking index)	550 / -	-	IEC 60112
ASTM數據(ASTM Data)
體積電阻率(Volume Resistivity)	1E13	Ohm*cm	ASTM D 257

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	7 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	2.2 / *	%	Sim. to ISO 62
密度(Density)	1230 / -	kg/m3	ISO 1183

材料特殊性能(Material specific properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
粘數(Viscosity number)	145 / *	cm3/g	ISO 307, 1157, 1628

CharacteristicsProcessingInjection Molding, Other ExtrusionDelivery formPellets, Natural ColorApplicationsAutomotive, Electrical and ElectronicalRegional AvailabilityNorth America, .

Ultramid? A3EG3|PA66-GF15|BASF