丝袜老师办公室里做好紧好爽,啦啦啦高清在线观看视频www,韩国三级+mp4,亚洲天堂久久一区av,亚洲熟妇色xxxxx亚洲

Technyl? A 216|PA66|Rhodia

Technyl? A 216|PA66|Rhodia 物性表: Technyl? A 216|PA66|Rhodia物性表及特性介紹,Technyl? A 216|PA66|Rhodia注塑參數詳情,如需Technyl? A 216|PA66|Rhodia下載, 可到相關下載區下載

Product TextsUnreinforced polyamide 66, medium viscosity, for injection moulding. 2 / 30	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	4.5 / 14	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	263 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	75 / *	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	70 / *	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	V-2 / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	V-2 / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8 / *	mm	IEC 60695-11-10
UL 識別(recognition)	UL / *	-	-
Oxygen index	26.5 / *	%	ISO 4589-1/-2

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	2.9 / 3.2	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	300 / 800	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13 / 1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	* / 1E13	Ohm	IEC 60093
電氣強度(Electric strength)	30 / 26	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600 / 575	-	IEC 60112

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.3 / *	%	Sim. to ISO 62
密度(Density)	1140 / -	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	225	°C	ISO 294
Injection Molding, mold temperature	80	°C	ISO 10724

Diagrams In the case that the virgin material has absorbed moisture, it must be dried to a final moisture content of less than 0,2% with a dehumidified air drying equipment at approx 80°C.ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] .
[/td][/tr][/table]

關鍵詞:
PA66
Rhodia
Technyl? A 216

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-82300.html

免責聲明: 本文 Technyl? A 216|PA66|Rhodia 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡