亚洲av综合色区无码专区,国产日韩在线亚洲色视频,亚洲国产欧美在线看片一国产,久久国产一区二区三区,视频一区视频二区在线视频

Staramide AST43|PA66|SABIC_IP

Staramide AST43|PA66|SABIC_IP 物性表: Staramide AST43|PA66|SABIC_IP物性表及特性介紹,Staramide AST43|PA66|SABIC_IP注塑參數詳情,如需Staramide AST43|PA66|SABIC_IP下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	1.1	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2300	MPa	ISO 527-1/-2
屈服應力(Yield stress)	60	MPa	ISO 527-1/-2
屈服應變(Yield strain)	4.6	%	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	100	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	100	kJ/m2	ISO 179/1eU
懸臂梁式?jīng)_擊切口 (23°C)	50	kJ/m2	ISO 180/1A
懸臂梁式?jīng)_擊切口	30	kJ/m2	ISO 180/1A
溫度(Temperature)	-40	°C	ISO 180/1A
洛氏硬度(Rockwell hardness)	R 110	-	ISO 2039-2

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	80	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	210	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	100	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (1MHz)	2.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	150	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	16	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	5.5	%	Sim. to ISO 62
密度(Density)	1090	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHigh impact or impact modifiedRegional AvailabilityEurope, Near East/AfricaDisclaimerCopyright M-Base .

關鍵詞:
PA66
SABIC_IP
Staramide AST43

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-82092.html

免責聲明: 本文 Staramide AST43|PA66|SABIC_IP 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡