中文字幕人妻色偷偷久久,亚洲精品国自产拍影院,国产成人无码AV片在线观看不卡,亚洲成a人片在线视频,一区二区三区四区在线不卡高清

Leona 1502(S)|PA66|Asahi Kasei

Leona 1502(S)|PA66|Asahi Kasei 物性表: Leona 1502(S)|PA66|Asahi Kasei物性表及特性介紹,Leona 1502(S)|PA66|Asahi Kasei注塑參數詳情,如需Leona 1502(S)|PA66|Asahi Kasei下載, 可到相關下載區下載

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
模具收縮(Mold Shrinkage) (MD)	0.013	mm/mm	ASTM D 955
模具收縮(Mold Shrinkage) (TD)	0.02	mm/mm	ASTM D 955
密度(Density) (73°F)	1140	kg/m3	ASTM D 792
吸水率(Water Absorption) (Equilibrium)	2.5	%	ASTM D 570

流變性能(Rheological properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	1.3 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	2.0 / *	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2900 / 1000	MPa	ISO 527-1/-2
屈服應力(Yield stress)	84 / 51	MPa	ISO 527-1/-2
屈服應變(Yield strain)	4.5 / 26	%	ISO 527-1/-2
破壞時應變(Strain at break)	- / >50	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	N / N	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5 / 30	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2700 / 900	MPa	ISO 178
洛氏硬度(Rockwell hardness)	R 120	-	ISO 2039-2
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength)	79	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	80	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2800	MPa	ASTM D 790
抗彎強度(Flexural Strength)	118	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 120	-	ASTM D 785
Taber Abrasion Resistance	5	mg/1000 cycles	ASTM D 1044
懸臂梁式?jīng)_擊切口 (1/8 in)	0.049	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	65 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	195 / *	°C	ISO 75-1/-2
ASTM數據(ASTM Data)
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	79.9	E-6/K	ASTM D 696
DTUL @ 66 psi	230	°C	ASTM D 648
DTUL @ 264 psi	70	°C	ASTM D 648
Specific Heat	1060	J/(kg K)	ASTM C 351

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
相比漏電起痕指數(Comparative tracking index)	525 / -	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	20.1	kV/mm	ASTM D 149
表面電阻率(Surface Resistivity)	1E14	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E15	Ohm*cm	ASTM D 257

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據
吸濕性(Humidity absorption)	2.5 / *	%	Sim. to ISO 62
密度(Density)	1140 / -	kg/m3	ISO 1183

CharacteristicsProcessingInjection Molding, Sheet ExtrusionDelivery formPelletsSpecial CharacteristicsHeat stabilized or stable to heatApplicationsAutomotive, .

關鍵詞:
PA66
Asahi Kasei
Leona 1502(S)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-80898.html

免責聲明: 本文 Leona 1502(S)|PA66|Asahi Kasei 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡