国内精品免费久久久久电影院97,国产精品久久久久久免费软件 ,思思久99久女女精品,荡乳尤物h,亚洲av片在线免费观看

RamTal PM3013G4|POM-GF20|Polyram

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	0.5	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	5	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
屈服應力(Yield stress)	90	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2.5	%	ISO 527-1/-2
彎曲彈性模量(Flexural modulus) (23°C)	3200	MPa	ISO 178
懸臂梁式沖擊切口 (23°C)	6.5	kJ/m2	ISO 180/1A
ASTM數據(ASTM Data)
抗彎強度(Flexural Strength)	120	MPa	ASTM D 790

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	165	°C	ISO 11357-1/-3

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E12	Ohm	IEC 60093
電氣強度(Electric strength)	20	kV/mm	IEC 60243-1

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1540	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingDelivery formPelletsFeaturesLow OdorRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
RamTal PM3013G4|POM-GF20|Polyram