在线观看视频一区二区三区,日韩激情成人,国产999久久高清免费观看,久久人人妻人人爽人人爽,成人欧美日韩一区二区三区

LATAN 13 G/30|POM-GF|Lati

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	0.6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.2	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	7500	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	100	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	3	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	25	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5	kJ/m2	ISO 179/1eA
ASTM數據(ASTM Data)
懸臂梁式?jīng)_擊切口 (1/8 in)	0.065	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	160	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	165	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	150	°C	ISO 306
ASTM數據(ASTM Data)
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	35	E-6/K	ASTM D 696

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1590	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingRegional AvailabilityEuropeDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
LATAN 13 G/30|POM-GF|Lati