久久AV中文综合一区二区,女女互揉吃奶揉到高潮视频,黄色三级亚洲男人的天堂,日韩精品一区二区三区中文,亚洲卡通欧美制服中文

KEPITAL? TP-20|POM|KEP

KEPITAL? TP-20|POM|KEP 物性表: KEPITAL? TP-20|POM|KEP物性表及特性介紹,KEPITAL? TP-20|POM|KEP注塑參數詳情,如需KEPITAL? TP-20|POM|KEP下載, 可到相關下載區下載

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	9	g/10min	ASTM D 1238
模具收縮(Mold Shrinkage) (MD)	0.02	mm/mm	ASTM D 955
密度(Density) (73°F)	1400	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	2.0	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	10	g/10min	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
抗拉強度(Tensile Strength)	57	MPa	ISO 527-1/-2
屈服應變(Yield strain)	10.5	%	ISO 527-1/-2
破壞時應變(Strain at break)	34	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5.5	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2450	MPa	ISO 178
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength)	53.8	MPa	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2351.11	MPa	ASTM D 790
抗彎強度(Flexural Strength)	76.5	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	M 80	-	ASTM D 785
懸臂梁式沖擊切口 (1/8 in)	0.0587	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	165	°C	ISO 11357-1/-3
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	130	E-6/K	ISO 11359-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	0.762	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	130	E-6/K	ASTM D 696
DTUL @ 66 psi	158	°C	ASTM D 648
DTUL @ 264 psi	110	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	165	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E16	Ohm	IEC 60093
ASTM數據(ASTM Data)
表面電阻率(Surface Resistivity)	1E16	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸水率(Water absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1380	kg/m3	ISO 1183

CharacteristicsAdditivesLubricantsFeaturesLow Coefficient of Friction, CopolymerRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
KEPITAL? TP-20|POM|KEP