一区二区三区av在线观看,亚洲熟妇自偷自拍另欧美,中文字幕欧美日韩,国产亚洲精品成人aa片新蒲金,国产精品久久久久婷婷五月

KEPITAL? F20-03|POM|KEP

KEPITAL? F20-03|POM|KEP 物性表: KEPITAL? F20-03|POM|KEP物性表及特性介紹,KEPITAL? F20-03|POM|KEP注塑參數詳情,如需KEPITAL? F20-03|POM|KEP下載, 可到相關下載區下載

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
模具收縮(Mold Shrinkage) (MD)	0.02	mm/mm	ASTM D 955
密度(Density) (73°F)	1410	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	2.0	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
抗拉強度(Tensile Strength)	65	MPa	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	35	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	7	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2550	MPa	ISO 178
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength)	60.7	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	60	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	2599.86	MPa	ASTM D 790
抗彎強度(Flexural Strength)	90	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	M80	-	ASTM D 785

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	103	°C	ISO 75-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	0.762	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	130	E-6/K	ASTM D 696
DTUL @ 66 psi	158	°C	ASTM D 648
DTUL @ 264 psi	110	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	165	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	1E10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093
電氣強度(Electric strength)	19	kV/mm	IEC 60243-1
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	19	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.007	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.7	-	ASTM D 150
表面電阻率(Surface Resistivity)	1E16	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1410	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingSpecial CharacteristicsHeat stabilized or stable to heatFeaturesCopolymerApplicationsGeneral PurposeRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
KEPITAL? F20-03|POM|KEP