免费无码观看的AV在线播放 ,88国产精品视频一区二区三区,人妻少妇精品性色av蜜桃,97人妻蜜臀中文字幕,亚洲人午夜精品射精日韩

KEPITAL? FB2025|POM-GB|KEP

加工/物理特性	值(Value)	單位(Unit)	測試標準(Test Standard)
ASTM數據(ASTM Data)
熔體流動指數(Melt Flow Index)	8	g/10min	ASTM D 1238
溫度(Temperature)	190	°C	-
負載(Load)	2.16	kg	-
模具收縮(Mold Shrinkage) (MD)	0.015	mm/mm	ASTM D 955
密度(Density) (73°F)	1590	kg/m3	ASTM D 792

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
成型收縮(Molding shrinkage) (parallel)	1.5	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
抗拉強度(Tensile Strength)	64	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	6	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	3.3	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	3700	MPa	ISO 178
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength)	60.8	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	13	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	3549.8	MPa	ASTM D 790
抗彎強度(Flexural Strength)	98	MPa	ASTM D 790
懸臂梁式?jīng)_擊切口 (1/8 in)	0.0519	kJ/m	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	115	°C	ISO 75-1/-2
Burning behav. at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	0.762	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	89.8	E-6/K	ASTM D 696
DTUL @ 264 psi	135	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	165	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E16	Ohm	IEC 60093
電氣強度(Electric strength)	20	kV/mm	IEC 60243-1
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	20	kV/mm	ASTM D 149
表面電阻率(Surface Resistivity)	1E16	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	1E14	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1590	kg/m3	ISO 1183

CharacteristicsProcessingInjection MoldingFeaturesLow Warpage, Sink Mark Resistant, CopolymerApplicationsGeneral PurposeRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
KEPITAL? FB2025|POM-GB|KEP