99久久精品免费看国产电影,暖暖免费高清日本在线观看5,国产一二三区在线,91人妻无码成人精品一区91,国产另类在线欧美日韩

Iupital F25|POM|Mitsubishi EP

Iupital F25|POM|Mitsubishi EP 物性表: Iupital F25|POM|Mitsubishi EP物性表及特性介紹,Iupital F25|POM|Mitsubishi EP注塑參數詳情,如需Iupital F25|POM|Mitsubishi EP下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體體積流動速率(Melt volume-flow rate) (MVR)	14	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	2.0	%	ISO 294-4, 2577
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	16	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	2900	MPa	ISO 527-1/-2
屈服應力(Yield stress)	64	MPa	ISO 527-1/-2
屈服應變(Yield strain)	8	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	27	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	200	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	6.5	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2600	MPa	ISO 178

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	105	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	156	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
燃燒性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
相對介電常數(Relative permittivity) (100Hz)	3.9	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.9	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	20	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	70	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E16	Ohm	IEC 60093
電氣強度(Electric strength)	32	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
吸濕性(Humidity absorption)	0.22	%	Sim. to ISO 62
密度(Density)	1410	kg/m3	ISO 1183

CharacteristicsRegional AvailabilityNorth America, Europe, Asia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
Iupital F25|POM|Mitsubishi EP