蜜桃在线一区二区三区,免费人成视频在线观看网站,亚洲日韩在线精品,国产一区韩国主播,伊人久久大香线蕉网av

HOSTAFORM LGC90-QX|POM-GF26|Ticona

Product TextsPreliminary Data Sheetticona.com/tech/processing under Celstran LFRT and Compel

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	9500	MPa	ISO 527-1/-2
破壞時應變(Stress at break)	160	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	2.6	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	60	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	26	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	167	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	166	°C	ISO 75-1/-2

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density)	1600	kg/m3	ISO 1183

CharacteristicsProcessingInjection Molding, Profile Extrusion, Sheet ExtrusionDelivery formPelletsRegional AvailabilityNorth America, Europe, South and Central America, Near East/AfricaOther text informationInjection moldingPREPROCESSING6 inches).It should have Screw flight depth should be at least 4.5mm (0.18 Use interior Additional corrosion 16 inches (4 mm) and preferably larger 125 inches (6 mm).A shut-off nozzle may be advisable if a An easy flowing, three-part, check-ring type of M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
HOSTAFORM LGC90-QX|POM-GF26|Ticona