亚洲精品国产综合久久一线,亚洲国产高清第一第二区,久久天天躁狠狠躁夜夜躁2o2o,亚洲人成人伊人成综合网无码,国产日韩一区二区天美麻豆

HOSTAFORM EC270TX|POM|Ticona

HOSTAFORM EC270TX|POM|Ticona 物性表: HOSTAFORM EC270TX|POM|Ticona物性表及特性介紹,HOSTAFORM EC270TX|POM|Ticona注塑參數詳情,如需HOSTAFORM EC270TX|POM|Ticona下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	1.5	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	1950	MPa	ISO 527-1/-2
屈服應力(Yield stress)	44	MPa	ISO 527-1/-2
屈服應變(Yield strain)	11	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	15	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	6.5	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
體積電阻率(Volume resistivity)	10	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1000	Ohm	IEC 60093

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density)	1380	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	9990	-	ISO ....-2

CharacteristicsProcessingInjection MoldingDelivery formPelletsRegional AvailabilityNorth America, EuropeOther text informationInjection moldingPREPROCESSINGExcessive moisture can lead to splay (silver streaking) in For better uniformity in molding especially when using Maximum water content = 0.35%35 Mpa/50 PSI) are favored. Using a low compression screw E. general purpose 2:1 compression ratio) can result in unmelted Using a high back pressure to make Melt 5 mm (0.060 in.). May Wall thickness greater ) may use a cooler (65 C/150 F) mold surface ) may use a cold mold In general, mold surface temperatures It may DisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
HOSTAFORM EC270TX|POM|Ticona