亚洲综合伊人久久大杳蕉,国产亚洲视频免费播放,亚洲综合中文字幕首页,成人性生交片无码免费看,亚洲免费视频一区二区三区

HOSTAFORM C 9021 SW XAP2 ? LS|POM|Ticona

HOSTAFORM C 9021 SW XAP2 ? LS|POM|Ticona 物性表: HOSTAFORM C 9021 SW XAP2 ? LS|POM|Ticona物性表及特性介紹,HOSTAFORM C 9021 SW XAP2 ? LS|POM|Ticona注塑參數詳情,如需HOSTAFORM C 9021 SW XAP2 ? LS|POM|Ticona下載, 可到相關下載區下載

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	7	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	2700	MPa	ISO 527-1/-2
屈服應力(Yield stress)	52	MPa	ISO 527-1/-2
屈服應變(Yield strain)	7	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	16	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	90	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	85	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	4	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	4	kJ/m2	ISO 179/1eA

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	80	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	140	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	120	E-6/K	ISO 11359-1/-2

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density)	1420	kg/m3	ISO 1183

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	9990	-	ISO ....-2
Injection Molding, melt temperature	205	°C	ISO 294
Injection Molding, mold temperature	90	°C	ISO 10724
Injection Molding, injection velocity	200	mm/s	ISO 294
Injection Molding, pressure at hold	90	MPa	ISO 294

CharacteristicsProcessingInjection Molding, Other ExtrusionDelivery formPelletsAdditivesLubricants, Release agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
HOSTAFORM C 9021 SW XAP2 ? LS|POM|Ticona