精品婷婷色一区二区三区,国产精品亚洲片夜色在线,高潮迭起av乳颜射后入,久久久天堂国产精品女人 ,亚洲中文字幕一区二区

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	2.5	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133

[tr][/tr][tr][/tr]

機械性能(機械性能(Mechanical properties))

值(Value)

單位(Unit)

測試標準(Test Standard)

ISO數據(ISO數據(CAMPUS/ISO) Data)

拉伸模量(Tensile Modulus)

2450

MPa

ISO 527-1/-2

屈服應力(Yield stress)

MPa

ISO 527-1/-2

屈服應變(Yield strain)

ISO 527-1/-2

斷裂拉伸應變(Nominal strain at break)

ISO 527-1/-2

簡支梁沖擊強度(Charpy impact strength) (+23°C)

220[P]

kJ/m2

ISO 179/1eU

簡支梁沖擊強度(Charpy impact strength) (-30°C)

200

kJ/m2

ISO 179/1eU

簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)

8.5

kJ/m2

ISO 179/1eA

簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)

kJ/m2

ISO 179/1eA

Partial Break

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	166	°C	ISO 11357-1/-3
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	15	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	50	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	1E14	Ohm	IEC 60093
電氣強度(Electric strength)	35	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.65	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.2	%	Sim. to ISO 62
密度(Density)	1410	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1200	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.155	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2210	J/(kg K)	-
噴射溫度(Ejection temperature)	165	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Processing conditions acc. ISO	9990	-	ISO ....-2
Injection Molding, melt temperature	205	°C	ISO 294
Injection Molding, mold temperature	90	°C	ISO 10724
Injection Molding, injection velocity	140	mm/s	ISO 294
Injection Molding, pressure at hold	90	MPa	ISO 294

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Blow MoldingDelivery formPelletsAdditivesRelease agentRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

HOSTAFORM C 2521 XAP|POM|Ticona