亚洲欧美在线观看一区二区,国产三级精品片,国产亚洲999精品AA片在线爽,最新国产精品拍自在线播放,中文国产成人久久精品小说

DURACON? M140S|POM|Polyplastics

DURACON? M140S|POM|Polyplastics 物性表: DURACON? M140S|POM|Polyplastics物性表及特性介紹,DURACON? M140S|POM|Polyplastics注塑參數詳情,如需DURACON? M140S|POM|Polyplastics下載, 可到相關下載區下載

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
抗拉強度(Tensile Strength)	62	MPa	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	5.5	kJ/m2	ISO 179/1eA
彎曲彈性模量(Flexural modulus) (23°C)	2500	MPa	ISO 178

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	100	°C	ISO 75-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
燃燒性厚度(Burning behav. at thickness h)	HB	class	IEC 60695-11-10
UL 識別(recognition)	UL	-	-

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
體積電阻率(Volume resistivity)	1E12	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	19	kV/mm	IEC 60243-1

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
密度(Density)	1410	kg/m3	ISO 1183

CharacteristicsFeaturesCopolymerRegional AvailabilityAsia PacificDisclaimerCopyright M-Base Engineering+Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

關鍵詞:
DURACON? M140S|POM|Polyplastics