丰满妇女强制高潮18xxxx ,日日猛噜噜狠狠扒开双腿小说,精精国产xxx在线观看,欧洲尺码日本尺码专线美国又,国产精品一区二区久久岳

Product TextsISO 9988: POM-H,MS2NR,4-2 Delrin? acetal resins also have excellent dimensional stability and good electrical insulating characteristics. They are naturally resilient, self-lubricating and available in a variety of colours and speciality grades. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-17 kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed. 05	kg	-
模具收縮(Mold Shrinkage) (MD)	0.0185	mm/mm	ASTM D 955
模具收縮(Mold Shrinkage) (TD)	0.0195	mm/mm	ASTM D 955
密度(Density) (73°F)	1420	kg/m3	ASTM D 792
吸水率(Water Absorption) (24hr)	0.27	%	ASTM D 570
吸水率(Water Absorption) (Equilibrium)	0.24	%	ASTM D 570

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	12	cm3/10min	ISO 1133
溫度(Temperature)	190	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	1.9	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.9	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	3100	MPa	ISO 527-1/-2
屈服應力(Yield stress)	70	MPa	ISO 527-1/-2
屈服應變(Yield strain)	14	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	23	%	ISO 527-1/-2
簡支梁沖擊強度(Charpy impact strength) (+23°C)	350	kJ/m2	ISO 179/1eU
簡支梁沖擊強度(Charpy impact strength) (-30°C)	290	kJ/m2	ISO 179/1eU
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	8	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	7	kJ/m2	ISO 179/1eA
ASTM數據(ASTM Data)
拉伸模量(Tensile Modulus)	3250	MPa	ASTM D 638
抗拉強度(Tensile Strength) at Yield	65	MPa	ASTM D 638
屈服伸長率(Elongation at Yield)	14	%	ASTM D 638
斷裂伸長率(Elongation at Break)	40	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	3000	MPa	ASTM D 790
洛氏硬度(Rockwell Hardness)	R 120	-	ASTM D 785
懸臂梁式沖擊切口 (1/8 in)	0.07	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.064	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	178	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	90	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	160	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	160	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	110	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	110	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	0.8	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	22	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	1.5	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	112	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	114	E-6/K	ASTM D 696
DTUL @ 66 psi	166	°C	ASTM D 648
DTUL @ 264 psi	105	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	178	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (1MHz)	3.5	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	60	E-4	IEC 60250
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	17.3	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.007	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.6	-	ASTM D 150
表面電阻率(Surface Resistivity)	>1E15	Ohm	ASTM D 257
體積電阻率(Volume Resistivity)	>1E15	Ohm*cm	ASTM D 257

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.25	%	Sim. to ISO 62
密度(Density)	1420	kg/m3	ISO 1183

Diagrams ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (>90°C)[/td][/tr][tr][td]Salt solutions[/td][/tr][tr][td] 4 Brake fluid (130°C)[/td][/tr][tr][td] M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from M-Base; this is especially valid for claims of compensation resulting from consequential damages. M-Base explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
[/td][/tr][/table]

Delrin? 500CL NC010|POM|DuPont