精品国产乱码久久久久夜深人妻,亚洲一区精品伊人久久,国产免费久久精品44,亚洲成人av综合一区,91精品国产老熟女在线

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔體體積流動速率(Melt volume-flow rate) (MVR)	12	cm3/10min	ISO 1133
溫度(Temperature)	240	°C	ISO 1133
負載(Load)	2.16	kg	ISO 1133
成型收縮(Molding shrinkage) (parallel)	1.6	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.7	%	ISO 294-4, 2577

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	530	MPa	ISO 527-1/-2
屈服應力(Yield stress)	29	MPa	ISO 527-1/-2
屈服應變(Yield strain)	22	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
Tensile creep modulus (1h)	360	MPa	ISO 899-1
Tensile creep modulus (1000h)	310	MPa	ISO 899-1
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	33	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	10	kJ/m2	ISO 179/1eA
Tensile notched impact strength (+23°C)	300	kJ/m2	ISO 8256/1
Stress at 10% elongation	23	MPa	ISO 527-1/-2
破壞時應變(Strain at break) TPE	>300	%	ISO 527-1/-2
破壞時應變(Stress at break) TPE	50	MPa	ISO 527-1/-2
抗拉強度(撕裂強度(Tear strength))	167	kN/m	ISO 34-1
Abrasion resistance	100	mm3	ISO 4649
Shore D hardness (15s)	68	-	ISO 868
ASTM數據(ASTM Data)
抗拉強度(Tensile Strength) at Break	45.8	MPa	ASTM D 638
斷裂伸長率(Elongation at Break)	360	%	ASTM D 638
彎曲彈性模量(彎曲彈性模量(Flexural Modulus))	570	MPa	ASTM D 790
Shore D Hardness	72	-	ASTM D 2240
懸臂梁式沖擊切口 (1/8 in)	0.21	kJ/m	ASTM D 256
懸臂梁式沖擊切口 (Low-溫度(Temperature))	0.04	kJ/m	ASTM D 256
溫度(Temperature)	-40	°C	ASTM D 256

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	218	°C	ISO 11357-1/-3
玻璃化轉變溫度(Glass transition temperature) (10°C/min)	25	°C	ISO 11357-1/-2
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	45	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	95	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	140	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	200	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	200	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.5	mm	IEC 60695-11-10
UL 識別(recognition)	UL	-	-
Oxygen index	22	%	ISO 4589-1/-2
ASTM數據(ASTM Data)
UL 94 阻燃等級(Flame rating)	HB	-	UL 94
厚度測試(Thickness tested)	1.5	mm	-
熱膨脹系數(Coefficient of Thermal Expansion) (MD)	171	E-6/K	ASTM D 696
熱膨脹系數(Coefficient of Thermal Expansion) (TD)	180	E-6/K	ASTM D 696
DTUL @ 66 psi	130	°C	ASTM D 648
DTUL @ 264 psi	52	°C	ASTM D 648
熔化溫度(Melting 溫度(Temperature))	218	°C	ASTM D 3418

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	4.2	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.7	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	190	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	300	E-4	IEC 60250
體積電阻率(Volume resistivity)	>1E13	Ohm*m	IEC 60093
表面電阻率(Surface resistivity)	>1E15	Ohm	IEC 60093
電氣強度(Electric strength)	20	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112
ASTM數據(ASTM Data)
絕緣強度(Dielectric Strength) (Short Time)	18.1	kV/mm	ASTM D 149
耗散因數(Dissipation Factor) (1 MHz)	0.03	-	ASTM D 150
介電常數(Dielectric Constant) (1 MHz)	3.5	-	ASTM D 150

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	1110	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.15	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	2150	J/(kg K)	-
Eff. thermal diffusivity	5.44E-8	m2/s	-
噴射溫度(Ejection temperature)	150	°C	-

Diagrams ISO 1817 Liquid C) (23°C)

ISO 1817 Liquid 4) (23°C)

ISO 1817 Liquid F) (23°C)

ISO 1817 Liquid F) (90°C)

ISO 1817 Liquid F) (>90°C)

Salt solutions

4 Brake fluid (130°C)

Hytrel? 7246|TPC|DuPont