性欧美暴力猛交69hd,人人人澡人人肉久久精品,国产成人剧情AV麻豆果冻,人妻18毛片A级毛片免费看,亚洲av日韩av永久无码电影

Arnitel? EM740|TPC|DSM

Arnitel? EM740|TPC|DSM 物性表: Arnitel? EM740|TPC|DSM物性表及特性介紹,Arnitel? EM740|TPC|DSM注塑參數詳情,如需Arnitel? EM740|TPC|DSM下載, 可到相關下載區下載

Product TextsExtrusion Grade16

ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
拉伸模量(Tensile Modulus)	1000	MPa	ISO 527-1/-2
屈服應力(Yield stress)	35	MPa	ISO 527-1/-2
屈服應變(Yield strain)	20	%	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)	15	kJ/m2	ISO 179/1eA
簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)	6	kJ/m2	ISO 179/1eA
Stress at 10% elongation	34.5	MPa	ISO 527-1/-2
破壞時應變(Strain at break) TPE	250	%	ISO 527-1/-2
破壞時應變(Stress at break) TPE	38	MPa	ISO 527-1/-2
抗拉強度(撕裂強度(Tear strength))	260	kN/m	ISO 34-1

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	221	°C	ISO 11357-1/-3
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	160	°C	ISO 306
COEFF線性熱(Coeff. of linear therm. expansion) (parallel)	165	E-6/K	ISO 11359-1/-2
COEFF線性熱(Coeff. of linear therm. expansion) (normal)	165	E-6/K	ISO 11359-1/-2
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6	mm	IEC 60695-11-10

電氣性能(Electrical properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.7	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	3.4	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	400	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E13	Ohm*m	IEC 60093
電氣強度(Electric strength)	23	kV/mm	IEC 60243-1
相比漏電起痕指數(Comparative tracking index)	600	-	IEC 60112

其他屬性(Other properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	0.6	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.15	%	Sim. to ISO 62
密度(Density)	1290	kg/m3	ISO 1183

流變計算屬性(Rheological calculation properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
密度(Density) of melt	900	kg/m3	-
熔體熱導率(Thermal conductivity of melt)	0.1	W/(m K)	-
規格的熱容融化(Spec. heat capacity of melt)	1900	J/(kg K)	-
Eff. thermal diffusivity	5.85E-8	m2/s	-
噴射溫度(Ejection temperature)	160	°C	-

Test specimen production	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
Injection Molding, melt temperature	240	°C	ISO 294
Injection Molding, mold temperature	35	°C	ISO 10724
Injection Molding, injection velocity	500	mm/s	ISO 294

Diagrams .
[/td][/tr][/table]

關鍵詞:
TPC
DSM
Arnitel? EM740

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-103345.html

免責聲明: 本文 Arnitel? EM740|TPC|DSM 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡