Product TextsThe data for this material was provided by Plastinfo.ru.| 流變性能(Rheological properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) | | ISO數據 | | 熔體流動指數(熔體流動指數(Melt flow index)) (MFI) | 2 | g/10min | ISO 1133 | | MFI溫度(MFI temperature) | 190 | °C | ISO 1133 | | MFI負載(MFI load) | 2.16 | kg | ISO 1133 |
| 機械性能(機械性能(Mechanical properties)) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) | | ISO數據 | | 拉伸模量(Tensile Modulus) | 280 | MPa | ISO 527-1/-2 | | 斷裂拉伸應變(Nominal strain at break) | >50 | % | ISO 527-1/-2 | | 破壞時應變(Stress at break) | 12.2 | MPa | ISO 527-1/-2 | | 破壞時應變(Strain at break) | >50 | % | ISO 527-1/-2 | | 彎曲彈性模量(Flexural modulus) (23°C) | 98 | MPa | ISO 178 |
| 熱性能(熱性能(Thermal properties)) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) | | ISO數據 | | 熔化溫度(熔化溫度(Melting temperature)) (10°C/min) | 110 | °C | ISO 11357-1/-3 | | Vicat softening temperature A | 100 | °C | ISO 306 | | COEFF線性熱(Coeff. of linear therm. expansion) (parallel) | 550 | E-6/K | ISO 11359-1/-2 |
| 電氣性能(Electrical properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) | | ISO數據 | | 相對介電常數(Relative permittivity) (1MHz) | 2.2 | - | IEC 60250 | | 耗散因數(耗散因數(Dissipation factor)) (1MHz) | 0.0002 | E-4 | IEC 60250 | | 體積電阻率(Volume resistivity) | >1E13 | Ohm*m | IEC 60093 | | 表面電阻率(Surface resistivity) | 1E15 | Ohm | IEC 60093 | | 電氣強度(Electric strength) | 40 | kV/mm | IEC 60243-1 |
| 其他屬性(Other properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) | | ISO數據 | | 吸水率(Water absorption) | 0.02 | % | Sim. to ISO 62 | | 密度(Density) | 919 | kg/m3 | ISO 1183 |
| 材料特殊性能(Material specific properties) | 值(Value) | 單位(Unit) | 測試標準(Test Standard) | | ISO數據 | | 粘數(Viscosity number) | 1.5 | cm3/g | ISO 307, 1157, 1628 |
CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Coating, Blow Molding, Transfer Molding, Thermoforming, Bead Foam Molding, Compression Molding, Rotational Molding, Blown Film Extrusion, Fiber Extrusion, Pipe/Tube Extrusion, Laser SinteringDelivery formNatural ColorAdditivesBlowing agent, Antiblocking agentSpecial CharacteristicsTransparentFeaturesAcoustical Barrier Properties, Crosslinkable, Ductile, Foamable, Heat Sealable, Low Odor, HomopolymerChemical ResistanceAcid Resistance, Alkali Resistance, General Chemical Resistance, Environmental Stress Crack Resistance, Solvent ResistanceApplicationsAutomotive, Building Construction, Chemical Process, Electrical and Electronical, General Purpose, Medical, Monofilament, Packaging, Slit Film, Sports EquipmentRegional AvailabilityEuropeDisclaimerCopyright M-Base .
|
|
