欧美中文字幕在线看,欧美喷水 xxxx,亚洲av综合色区无码专区,国产免费无遮挡吸乳视频在线观看,国产三级精品片

Polyethylene 158-14|(PE-LD)|UfaorgSyntez

Product TextsThe data for this material was provided by Plastinfo.ru.

流變性能(Rheological properties)	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔體流動指數(熔體流動指數(Melt flow index)) (MFI)	2	g/10min	ISO 1133
MFI溫度(MFI temperature)	190	°C	ISO 1133
MFI負載(MFI load)	2.16	kg	ISO 1133

機械性能(機械性能(Mechanical properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
拉伸模量(Tensile Modulus)	280	MPa	ISO 527-1/-2
斷裂拉伸應變(Nominal strain at break)	>50	%	ISO 527-1/-2
破壞時應變(Stress at break)	11.3	MPa	ISO 527-1/-2
破壞時應變(Strain at break)	>50	%	ISO 527-1/-2
彎曲彈性模量(Flexural modulus) (23°C)	98	MPa	ISO 178

熱性能(熱性能(Thermal properties))	值(Value)	單位(Unit)	測試標準(Test Standard)
ISO數據
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	110	°C	ISO 11357-1/-3
Vicat softening temperature A	100	°C	ISO 306

CharacteristicsProcessingInjection Molding, Film Extrusion, Profile Extrusion, Sheet Extrusion, Other Extrusion, Coating, Blow Molding, Transfer Molding, Thermoforming, Compression Molding, Rotational Molding, Blown Film Extrusion, Pipe/Tube Extrusion, Laser SinteringDelivery formBlackSpecial CharacteristicsLight stabilized or stable to light, U.V. stabilized or stable to weatherFeaturesDuctile, Heat Sealable, Non Blooming, HomopolymerChemical ResistanceAcid Resistance, Alkali Resistance, General Chemical Resistance, Solvent ResistanceApplicationsSlit FilmRegional AvailabilityEuropeDisclaimerCopyright M-Base .

關鍵詞:
(PE-LD)
UfaorgSyntez
Polyethylene 158-14

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/wuxingbiao/show-102632.html

免責聲明: 本文 Polyethylene 158-14|(PE-LD)|UfaorgSyntez 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡