欧美三级不卡在线观线看高清,亚洲av无码成人精品区一区,一级毛片网,亚洲成av人片在线观看www,人妻va精品va欧美va

Product TextsVESTAMID? LX9008 blkg., in the engine compartment of motor vehicles. Especially when used as diesel 2 / *	%	ISO 294-4, 2577
成型收縮(Molding shrinkage) (normal)	1.9 / *	%	ISO 294-4, 2577

[tr][/tr][tr][/tr]

機械性能(機械性能(Mechanical properties))

dry / cond

單位(Unit)

測試標準(Test Standard)

ISO數據(ISO數據(CAMPUS/ISO) Data)

拉伸模量(Tensile Modulus)

1450 / -

MPa

ISO 527-1/-2

屈服應力(Yield stress)

42 / -

MPa

ISO 527-1/-2

屈服應變(Yield strain)

5 / -

ISO 527-1/-2

斷裂拉伸應變(Nominal strain at break)

>50 / -

ISO 527-1/-2

簡支梁沖擊強度(Charpy impact strength) (+23°C)

N / -

kJ/m2

ISO 179/1eU

簡支梁沖擊強度(Charpy impact strength) (-30°C)

N / -

kJ/m2

ISO 179/1eU

簡支梁缺口沖擊強度(Charpy notched impact strength) (+23°C)

45[P] / -

kJ/m2

ISO 179/1eA

簡支梁缺口沖擊強度(Charpy notched impact strength) (-30°C)

22 / -

kJ/m2

ISO 179/1eA

Partial Break

熱性能(熱性能(Thermal properties))	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
熔化溫度(熔化溫度(Melting temperature)) (10°C/min)	176 / *	°C	ISO 11357-1/-3
溫度負荷變形(Temp. of deflection under load) (1.80 MPa)	45 / *	°C	ISO 75-1/-2
溫度負荷變形(Temp. of deflection under load) (0.45 MPa)	125 / *	°C	ISO 75-1/-2
維卡軟化溫度（50℃/ h的50N）Vicat softening temperature	145 / *	°C	ISO 306
燃燒性(球壓痕硬度(Burning behav)). at 1.5 mm nom. thickn.	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	1.6 / *	mm	IEC 60695-11-10
燃燒性(球壓痕硬度(Burning behav)). at thickness h	HB / *	class	IEC 60695-11-10
厚度測試(Thickness tested)	3.2 / *	mm	IEC 60695-11-10

電氣性能(Electrical properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
相對介電常數(Relative permittivity) (100Hz)	3.7 / -	-	IEC 60250
相對介電常數(Relative permittivity) (1MHz)	2.9 / -	-	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (100Hz)	520 / -	E-4	IEC 60250
耗散因數(耗散因數(Dissipation factor)) (1MHz)	320 / -	E-4	IEC 60250
體積電阻率(Volume resistivity)	1E12 / -	Ohm*m	IEC 60093
電氣強度(Electric strength)	37 / -	kV/mm	IEC 60243-1

其他屬性(Other properties)	dry / cond	單位(Unit)	測試標準(Test Standard)
ISO數據(ISO數據(CAMPUS/ISO) Data)
吸水率(Water absorption)	1.4 / *	%	Sim. to ISO 62
吸濕性(Humidity absorption)	0.7 / *	%	Sim. to ISO 62
密度(Density)	1010 / -	kg/m3	ISO 1183

CharacteristicsProcessingProfile Extrusion, Other ExtrusionDelivery formPelletsSpecial CharacteristicsHigh impact or impact modified, Light stabilized or stable to light, U.V. stabilized or stable to weather, Heat stabilized or stable to heatRegional AvailabilityNorth America, Europe, Asia Pacific, South and Central America, Near East/AfricaOther text informationOther extrusionPREPROCESSING INFORMATION1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during1 % The drying time is dependentAt a drying temperature of 80 °C we recommend, depending on the waterFresh air dryers are acceptable, better would be a dry air orPlease note our product literature, plasticized resins can lose plasticizer during ISO 1817 Liquid C) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid 4) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (23°C)[/td][/tr][tr][td] ISO 1817 Liquid F) (90°C)[/td][/tr][tr][td] 4 Brake fluid (120°C)[/td][/tr][tr][td] .
[/td][/tr][/table]

VESTAMID? LX9008 blk (sw)|PA12-I|Evonik Industries