填料/增強材料: 玻璃纖維增強材料, 15% 填料按重量
特性: 優良外觀
用途: 把手,電器用具,外殼
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530)
- 干燥溫度 121 °C
- 熱絲引燃 (HWI) PLC 2 UL 746
- 建議注射量 %
- 特定體積 0.704 cm3/g ASTM D792
- 介電強度 ASTM D149
- RTI Imp 110 °C UL 746
- 比重 1.43 g/cm3 ASTM D792
- 料筒后部溫度 °C
- 加工（熔體）溫度 °C
- 建議的最大水分含量 0.020 %