特性: 無鹵
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 抗張強度 ASTM D638
- 耗散因數 ASTM D150
- 排氣孔深度 mm
- 干燥時間，最大 48 hr
- 維卡軟化溫度 154 °C ASTM D1525
- 干燥溫度 121 °C
- 高電壓電弧起痕速率 (HVTR) PLC 2 UL 746
- 落錘沖擊 169 J ASTM D3029
- 高電弧燃燒指數(HAI) PLC 1 UL 746
- 熔流率（熔體流動速率） 7.0 g/10 min ASTM D1238