用途: 室外應用
外觀: 可用顏色
加工方法: 片材擠出成型,注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 建議的最大水分含量 0.040 %
- RTI Elec 50.0 °C UL 746
- 料筒2區溫度 °C
- 比重 1.14 g/cm3 ASTM D792
- 吸水率 0.24 % ASTM D570
- 導熱系數 0.25 W/m/K ASTM C177
- 干燥溫度 °C
- 加工（熔體）溫度 °C
- 線形熱膨脹系數 ASTM E831
- 彎曲應力