特性: 高強度,耐化學性良好,耐熱性，高,通用,無定形的,阻燃性
用途: 通用
外觀: 清晰/透明
加工方法: 擠出吹塑成型,注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Compressive Stress vs. Strain (ASTM D695),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 口模溫度 °C
- RTI Imp 170 °C UL 746
- 料筒2區溫度 °C
- 料筒1區溫度 °C
- 相比耐漏電起痕指數(CTI) PLC 4 UL 746
- 落錘沖擊 36.6 J ASTM D3029
- NBS Smoke Density - Flaming, Ds, 4 min 0.700 ASTM E662
- 接頭溫度 °C
- 熔流率（熔體流動速率） 9.0 g/10 min ASTM D1238