特性: 高強度,良好的流動性,耐化學性良好,耐熱性，高,通用,無定形的,阻燃性
用途: 通用
外觀: 清晰/透明
加工方法: 注射成型
多點數(shù)據(jù): Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 拉伸模量 3590 MPa ASTM D638
- 排氣孔深度 mm
- 干燥時間，最大 24 hr
- 泰伯耐磨性 10.0 mg ASTM D1044
- 彎曲強度 165 MPa ASTM D790
- 背壓 MPa
- 線形熱膨脹系數(shù) - 流動 5.6E-5 cm/cm/°C ASTM E831
- RTI Imp 170 °C UL 746
- 彎曲強度 165 MPa ASTM D790
- 載荷下熱變形溫度 ASTM D648