特性: 可加工性，良好,通用
用途: 把手,泵件,通用,文具
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 背壓 MPa
- 螺桿轉速 rpm
- 加工（熔體）溫度 °C
- 體積電阻率 ohms·cm ASTM D257
- UL 阻燃等級 HB UL 94
- 伸長率 200 % ASTM D638
- 特定體積 0.770 cm3/g ASTM D792
- 抗張強度 51.7 MPa ASTM D638
- 熱絲引燃 (HWI) PLC 3 UL 746
- 無缺口懸臂梁沖擊 1600 J/m ASTM D4812