添加劑: 脫模
特性: 無鹵
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Compressive Stress vs. Strain (ASTM D695),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 落錘沖擊 169 J ASTM D3029
- 吸水率 ASTM D570
- 拉伸沖擊強度 578 kJ/m2 ASTM D1822
- 排氣孔深度 mm
- 干燥溫度 121 °C
- 霧度 1.0 % ASTM D1003
- UL 阻燃等級 HB UL 94
- 線形熱膨脹系數 - 流動 6.8E-5 cm/cm/°C ASTM E831
- 線形熱膨脹系數 - 流動 6.8E-5 cm/cm/°C ASTM E831
- 伸長率 ASTM D638