添加劑: 阻燃性
特性: Chlorine Free,抗撞擊性，良好,良好的流動性,耐熱性，中等,無溴,阻燃性
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 裝有測量儀表的落鏢沖擊 ASTM D3763
- 表面電阻率 ohms ASTM D257
- 高電弧燃燒指數(HAI) PLC 0 UL 746
- 料筒后部溫度 °C
- 極限氧指數 32 % ASTM D2863
- 彎曲模量 2650 MPa ASTM D790
- 高電弧燃燒指數(HAI) PLC 0 UL 746
- 干燥溫度 °C
- RTI Elec 85.0 °C UL 746
- 導熱系數 0.20 W/m/K ASTM C177