填料/增強材料: 玻璃纖維增強材料, 30% 填料按重量
添加劑: 沖擊改性劑
特性: 沖擊改性,流動性高,水解穩定
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 加工（熔體）溫度 °C
- 加工（熔體）溫度 °C
- 螺桿轉速 rpm
- 彎曲模量 ASTM D790
- 干燥溫度 °C
- 料筒前部溫度 °C
- 彎曲應變 - 1.3 mm/min, 50 mm span ASTM D790
- 拉伸模量 8840 MPa ASTM D638
- 加工（熔體）溫度 °C
- 伸長率 ASTM D638