填料/增強材料: 玻璃纖維增強材料, 30% 填料按重量
特性: 尺寸穩定性良好,水解穩定,吸水低或不吸水
用途: 泵件
機構評級: FDA 未評級,NSF 61
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 簡支梁缺口沖擊強度 ISO 179/2C
- 熔流率（熔體流動速率） 8.7 g/10 min ASTM D1238
- 干燥時間 hr
- 螺桿轉速 rpm
- 耗散因數 ASTM D150
- 建議注射量 %
- 料筒前部溫度 °C
- 耗散因數 ASTM D150
- 無缺口懸臂梁沖擊
- 建議的最大水分含量 0.020 %