特性: 尺寸穩定性良好,水解穩定,吸水低或不吸水
用途: 泵件,閥門/閥門部件
機構評級: FDA 未評級,NSF 61
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- UL 阻燃等級 HB UL 94
- 彎曲應力
- 干燥時間，最大 8.0 hr
- 介電強度 22 kV/mm ASTM D149
- 高電壓電弧起痕速率 (HVTR) PLC 4 UL 746
- 吸水率
- 線形熱膨脹系數 ASTM E831, ISO 11359-2
- 抗張強度
- 彎曲應力
- 干燥時間 hr