特性: 符合 ECO,流動性高
機構評級: EU Eco
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 比重 1.26 g/cm3 ASTM D792
- 背壓 MPa
- 排氣孔深度 mm
- 料筒前部溫度 °C
- 加工（熔體）溫度 °C
- 無缺口懸臂梁沖擊 2100 J/m ASTM D4812
- 干燥溫度 135 °C
- 排氣孔深度 mm
- UL 阻燃等級 UL 94
- 模具溫度 °C