填料/增強材料: 玻璃纖維增強材料, 30% 填料按重量
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 料筒前部溫度 °C
- RTI 50.0 °C UL 746
- 載荷下熱變形溫度 ASTM D648
- 彎曲模量 8580 MPa ASTM D790
- 彎曲模量 8580 MPa ASTM D790
- 加工（熔體）溫度 °C
- 干燥時間 hr
- 抗張強度 ASTM D638
- 干燥時間，最大 8.0 hr
- 耐電弧性 PLC 6 ASTM D495