特性: 良好的流動性
用途: 汽車內部零件
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Compressive Stress vs. Strain (ASTM D695),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 建議注射量 %
- 干燥時間 hr
- 加工（熔體）溫度 °C
- 吸水率 0.16 % ASTM D570
- 模具溫度 °C
- 料筒前部溫度 °C
- 料筒后部溫度 °C
- 干燥溫度 121 °C
- 伸長率 110 % ASTM D638
- 背壓 MPa