填料/增強材料: 玻璃纖維增強材料, 30% 填料按重量
特性: 尺寸穩定性良好,剛性，良好,良好的強度,耐熱性，高
用途: 把手,家電部件,連接器
加工方法: 注射成型
多點數據: Coefficient of Thermal Expansion vs. Temperature (ASTM E831),Elastic Modulus vs Temperature (ASTM D4065),Flexural DMA (ASTM D4065),Instrumented Impact (Energy) (ASTM D3763),Instrumented Impact (Load) (ASTM D3763),Pressure-Volume-Temperature (PVT - Zoller Method),Shear DMA (ASTM D4065),Specific Heat vs. Temperature (ASTM D3417),Tensile Creep (ASTM D2990),Tensile Fatigue,Tensile Stress vs. Strain (ASTM D638),Thermal Conductivity vs. Temperature (ASTM E1530),Viscosity vs. Shear Rate (ASTM D3835)
- 建議的最大水分含量 0.020 %
- 料筒后部溫度 °C
- 表面電阻率 ohms IEC 60093
- 維卡軟化溫度
- 簡支梁無缺口沖擊強度 ISO 179/1eU
- RTI Elec 140 °C UL 746
- 建議的最大水分含量 0.020 %
- 極限氧指數 19 % ASTM D2863
- 料筒中部溫度 °C
- 螺桿轉速 rpm