精精国产xxx在线观看,一区二区三区成人,一二三四中文字幕日韩乱码,2021亚洲va在线va天堂va国产,久久这里都是精品一区

IV1 (n) ul證書編號:E55798

IV1 (n) 物性表: IV1 (n)物性表及特性介紹,IV1 (n)注塑參數詳情,如需IV1 (n)下載, 可到相關下載區下載

品名(產品大類): Elastomer(Rubber)
阻燃等級(Flame Class): l11
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): a
電氣強度(RTI Elec): b
機械沖擊(RTI Imp): a
機械強度(RTI Str): b
ul證書編號: E55798
UL廠家: ARMACELL L L C

su-jiao.com/ul/ UL黃卡查詢	E55798
ARMACELL L L C
7600 OAKWOOD ST EXT, MEBANE NC 27302
IV1 (n)
Nitrile Rubber/Polyvinylchloride/Neoprene(NBR/PVC/CR), closed-cell foam, "Ensolite", furnished as profiles, tubes or sheets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
BK	1.3	HF-1	-	-	50	-	50
	11.7	V-0	-	-	50	-	50
	12.5	V-0	-	-	50	-	50
	12.5	HF-1	-	-	50	-	50

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(n) -

Density range 0.063 - 0.074 g/cc w/o skin and 0.077 - 0.156 g/cc w/ skin

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1986-06-06 Last Revised: 2012-01-19

admin@su-jiao.com

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	ISO 9772, IEC 60695-11-10	Class (color)	1.3	HF-1 (BK)
			11.7	V-0 (BK)
			12.5	V-0 (BK)
			12.5	HF-1 (BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

admin@su-jiao.com

關鍵詞:
供應
Elastomer(Rubber)
IV1 (n)

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-9109.html

免責聲明: 本文 IV1 (n) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡