久久91精品牛牛,国色精品卡一卡2卡3卡4卡在线,日本污视频在线观看,妺妺窝人体色www看美女,天天色综网

KMC-6000# ul證書編號:E188782

KMC-6000# 物性表: KMC-6000#物性表及特性介紹,KMC-6000#注塑參數詳情,如需KMC-6000#下載, 可到相關下載區下載

品名(產品大類): Epoxy(EP)
阻燃等級(Flame Class): b2
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): a
電氣強度(RTI Elec): r
機械沖擊(RTI Imp): r
機械強度(RTI Str): r
ul證書編號: E188782
UL廠家: SHIN-ETSU CHEMICAL CO LTD

www.spnmy.cn/ul/ UL黃卡查詢	E188782
SHIN-ETSU CHEMICAL CO LTD
6-1 OHTEMACHI 2-CHOME, CHIYODA-KU, TOKYO 100-0004 JP
KMC-6000#
Epoxy Molding Compound (EP - Molding), furnished as powder, tablets or pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
BK	1.0	V-0	-	-	130	130	130
	1.6	V-0	-	-	130	130	130
	3.0	V-0	-	-	130	130	130

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

# -	May be followed by up to five alphanumeric characters.Exception: KMC-140 can not be followed by the letter M.
NOTE -	All letters in the trademarks except for "ShinEtsu" may be exhibited in capital letters and/or in lower-case letters. KMC grades only, "-" may be excluded.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1998-06-11 Last Revised: 2013-05-31

郵箱:admin@su-jiao.com

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	1.0	V-0 (BK)
			1.6	V-0 (BK)
			3.0	V-0 (BK)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

郵箱:admin@su-jiao.com

關鍵詞:
供應
Epoxy(EP)
KMC-6000#

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-7974.html

免責聲明: 本文 KMC-6000# 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡