看全色黄大黄大色免费久久,日韩久久久久久中文人妻,最新亚洲精品国偷自产在线,亚洲男人天堂av在线,亚洲精品97久久中文字幕无码

品名(產品大類): Silicone
阻燃等級(Flame Class): b2
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): a
電氣強度(RTI Elec): t
機械沖擊(RTI Imp): t
機械強度(RTI Str): t
ul證書編號: E180840
UL廠家: LAIRD TECHNOLOGIES

UL黃卡 www.spnmy.cn/ul/	E180840
LAIRD TECHNOLOGIES
4707 DETROIT AVE, CLEVELAND OH 44102-2216
Tflex HR6(WWW)FG(c), T-flex HR6(WWW)FG(c)
Silicone Molding Resin (SIR), thermally conductive, furnished as sheet, rolls or die cut parts.

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC	0.25	V-0	-	-	150	150	150
	9.0	V-0	-	-	150	150	150

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(WWW) -	Replaced by two or three digits to represent thickness in mils from 10-350+ mils (Max 500 mils).
(c) -	Flame rating only valid for material between 2 sheets of Recognized Component (QMTS2) FR-4 laminate or aluminum, that are a minimum thickness each of 1.45mm thick

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2010-04-16 Last Revised: 2013-07-26

聯系人:趙經理

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	0.25	V-0 (NC)
			9.0	V-0 (NC)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

聯系人:趙經理

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-64152.html

免責聲明: 本文 Tflex HR6(WWW)FG(c),T-flex HR6(WWW)FG(c) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡