日韩丝袜人妻中文字幕,精精国产xxx在线观看,综合色天天久久,一区二区三区四区在线不卡高清,亚洲国产成人无码av在线影院

AT7(d)(h) ul證書編號:E171626

AT7(d)(h) 物性表: AT7(d)(h)物性表及特性介紹,AT7(d)(h)注塑參數詳情,如需AT7(d)(h)下載, 可到相關下載區下載

品名(產品大類): SAN
阻燃等級(Flame Class): a1
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): a
電氣強度(RTI Elec): b
機械沖擊(RTI Imp): b
機械強度(RTI Str): b
ul證書編號: E171626
UL廠家: ASAHI KASEI CHEMICALS CORP STYLAC DIV

UL黃卡查詢 su-jiao.com/ul/	E171626
ASAHI KASEI CHEMICALS CORP STYLAC DIV
MIZUSHIMA PLANT, 13 USHIO-DORI 3-CHOME, KURASHIKI-SHIOKAYAMA712-8633 JP
AT7(d)(h)
Polymethyl Methacrylate / Styrene Acrylonitrile (PMMA/SAN), furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
ALL	1.5	HB	-	-	50	50	50
	3.0	HB	-	-	50	50	50

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(d) -	Any one digit 0 through 9.
(h) -	May be replaced by one alphabetical letter from A to Z.
NOTE -	Material designations may be preceeded by two to ten letters and followed by ten to thirty letters, being separated by more than one space before and after the designation.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2009-10-29 Last Revised: 2012-08-23

聯系人:趙先生

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	1.5	HB75 (ALL)
			3.0	HB40 (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

聯系人:趙先生

關鍵詞:
供應
AT7(d)(h)
SAN229/229

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-63371.html

免責聲明: 本文 AT7(d)(h) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡