粉嫩jk制服美女啪啪,一本本月无码-,欧美日本中文,中文字幕精品亚洲人成在线,国内自拍小视频在线看

FR530(l)(+)(f1),FR530L(l)(+)(f1) ul證書編號:E41938

FR530(l)(+)(f1),FR530L(l)(+)(f1) 物性表: FR530(l)(+)(f1),FR530L(l)(+)(f1)物性表及特性介紹,FR530(l)(+)(f1),FR530L(l)(+)(f1)注塑參數詳情,如需FR530(l)(+)(f1),FR530L(l)(+)(f1)下載, 可到相關下載區下載

品名(產品大類): PET
阻燃等級(Flame Class): b2
熱絲著火性(HWI): e
高電流電弧著火性 (HAI): c
比較導電徑跡(CTI): d
電氣強度(RTI Elec): u
機械沖擊(RTI Imp): a
機械強度(RTI Str): a
ul證書編號: E41938
UL廠家: E I DUPONT DE NEMOURS &amp; CO INC

UL黃卡查詢 www.spnmy.cn/ul/	E41938
E I DUPONT DE NEMOURS & CO INC
ENGINEERING POLYMERS, CHESTNUT RUN PLAZA, PO BOX 80713, WILMINGTON DE 19880-0713
FR530(l)(+)(f1), FR530L(l)(+)(f1)
Polyethylene Terephthalate (PET), glass reinforced, flame retardant, "Rynite", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
NC, BK	0.35	V-0	3	1	155	-	-
ALL	0.75	V-0	2	1	155	155	155
NC	0.9	V-0, 5VA	2	1	155	155	155
NC, BK	1.5	V-0, 5VA	0	1	155	155	155
ALL	2.0	V-0, 5VA	0	1	155	155	155
	3.0	V-0, 5VA	0	1	155	155	155

Comparative Tracking Index (CTI):	2	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	34	Volume Resistivity (10x ohm-cm) :	16
High-Voltage Arc Tracking Rate (HVTR):	1	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	0

(+) -	Virgin and regrind up to 50% by weight inclusive, have the same basic material characteristics.
(f1) -	Suitable for outdoor use with respect to exposure to Ultraviolet Light, Water Exposure and Immersion in accordance with UL 746C.
(l) -	Recognized ground insulation component at 0.4 mm with MW79 in UL1446 Class 155 electrical insulation system designated R201N (File E69939).
NOTE -	(1) Material designations that are color pigmented may be followed by suffix letters and numbers. (2) Material designations may be prefixed by "ZYT" for Zytel or "MIN" for Minlon or "DEL" for Delrin or "CRA" for Crastin or "RYN" for Rynite or "ETPV" for ETPV or "SOR" for Sorona grades.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1996-01-04 Last Revised: 2012-06-18

admin@su-jiao.com

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10, IEC 60695-11-20	Class (color)	0.35	V-0 (NC, BK)
			0.75	V-0 (ALL)
			0.9	V-0, 5VA (NC)
			1.5	V-0, 5VA (NC, BK)
			2.0	V-0, 5VA (ALL)
			3.0	V-0, 5VA (ALL)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	0.75	960
			0.9	960
			1.5	960
			2.0	960
			3.0	960
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	0.75	800
			0.9	800
			1.5	800
			2.0	985
			3.0	985
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	3.0	245
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

admin@su-jiao.com

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-54901.html

免責聲明: 本文 FR530(l)(+)(f1),FR530L(l)(+)(f1) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡