亚洲成av人片在www色猫咪,аⅴ天堂国产最新版在线中文,无码国产精品一区二区VR老人,小13箩利洗澡无码视频网站 ,狠狠色综合播放一区二区

2310 ul證書編號:E207780

2310 物性表: 2310物性表及特性介紹,2310注塑參數詳情,如需2310下載, 可到相關下載區下載

品名(產品大類): PEI
阻燃等級(Flame Class): b2
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): f
電氣強度(RTI Elec): m
機械沖擊(RTI Imp): m
機械強度(RTI Str): m
ul證書編號: E207780
UL廠家: SABIC INNOVATIVE PLASTICS JAPAN L L C

www.spnmy.cn/ul/ UL黃卡	E207780
SABIC INNOVATIVE PLASTICS JAPAN L L C
PACIFIC GRADES - RESIN, 2-2 KINUGAOKA, MOKA-SHITOCHIGI-KEN321-4392 JP
2310
Polyetherimide (PEI), "Ultem", furnished as pellets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
ALL	0.25	V-0	-	-	105	105	105
	1.5	V-0	3	3	180	170	180
	3.0	V-0	1	4	180	170	180
NC	1.2	V-0, 5VA	-	-	105	105	105

Comparative Tracking Index (CTI):	4	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	18	Volume Resistivity (10x ohm-cm) :	14
High-Voltage Arc Tracking Rate (HVTR):	3	High Volt, Low Current Arc Resis (D495):	6
Dimensional Stability (%):	0.15

NOTE -

Material designation may be followed by a color nomenclature consisting of either an alpha/numeric or numeric/alpha combination.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 1981-10-13 Last Revised: 2009-04-10

聯系人:趙生

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10, IEC 60695-11-20	Class (color)	0.25	V-0 (ALL)
			1.5	V-0 (ALL)
			3.0	V-0 (ALL)
			1.2	V-0, 5VA (NC)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

聯系人:趙生

關鍵詞:
PEI
供應
2310

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-30266.html

免責聲明: 本文 2310 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡