粗大猛烈进出高潮视频,日本夜爽爽一区二区三区,国产无遮挡又黄又爽不要vip软件,野花韩国高清电影,国产人免费人成免费视频

Tgard 5000 A1 (o),T-gard 5000 A1 (o) ul證書編號:E180840

Tgard 5000 A1 (o),T-gard 5000 A1 (o) 物性表: Tgard 5000 A1 (o),T-gard 5000 A1 (o)物性表及特性介紹,Tgard 5000 A1 (o),T-gard 5000 A1 (o)注塑參數詳情,如需Tgard 5000 A1 (o),T-gard 5000 A1 (o)下載, 可到相關下載區下載

品名(產品大類): PI
阻燃等級(Flame Class): b2
熱絲著火性(HWI): a
高電流電弧著火性 (HAI): a
比較導電徑跡(CTI): a
電氣強度(RTI Elec): a
機械沖擊(RTI Imp): a
機械強度(RTI Str): a
ul證書編號: E180840
UL廠家: LAIRD TECHNOLOGIES

UL黃卡查詢 www.spnmy.cn/ul/	E180840
LAIRD TECHNOLOGIES
4707 DETROIT AVE, CLEVELAND OH 44102-2216
Tgard 5000 A1 (o),T-gard 5000 A1 (o)
Polyimide/Silicone Molding Resin (PI/SIR), furnished as sheets

	Min Thk	Flame			RTI	RTI	RTI
Color	(mm)	Class	HWI	HAI	Elec	Imp	Str
TN	0.140	V-0	-	-	-	-	-

Comparative Tracking Index (CTI):	-	Inclined Plane Tracking (IPT):	-
Dielectric Strength (kV/mm):	-	Volume Resistivity (10x ohm-cm) :	-
High-Voltage Arc Tracking Rate (HVTR):	-	High Volt, Low Current Arc Resis (D495):	-
Dimensional Stability (%):	-

(o) -

Flame rating only valid for material adhered on one side to one sheet of aluminum, copper, steel, silicon or nickel that is a minimum of 0.39mm (1.5mils) thick.

ANSI/UL 94 small-scale test data does not pertain to building materials, furnishings and related contents. ANSI/UL 94 small-scale test data is intended solely for determining the flammability of plastic materials used in the components and parts of end-product devices and appliances, where the acceptability of the combination is determined by UL.

Report Date: 2006-05-18 Last Revised: 2011-02-25

admin@su-jiao.com

IEC and ISO Test Methods

			Thickness
Test Name	Test Method	Units	Tested (mm)	Value
Flammability	IEC 60695-11-10	Class (color)	0.140	V-0 (TN)
Glow-Wire Flammability (GWFI)	IEC 60695-2-12	C	-	-
Glow-Wire Ignition (GWIT)	IEC 60695-2-13	C	-	-
IEC Comparative Tracking Index	IEC 60112	Volts (Max)	-	-
IEC Ball Pressure	IEC 60695-10-2	C	-	-
ISO Heat Deflection (1.80 MPa)	ISO 75-2	C	-	-
ISO Tensile Strength	ISO 527-2	MPa	-	-
ISO Flexural Strength	ISO 178	MPa	-	-
ISO Tensile Impact	ISO 8256	kJ/m2	-	-
ISO Izod Impact	ISO 180	kJ/m2	-	-
ISO Charpy Impact	ISO 179-2	kJ/m2	-	-

admin@su-jiao.com

轉載請注明: 轉自中國塑膠原料之家 http://www.spnmy.cn/wuxingbiao/

本文鏈接: http://www.spnmy.cn/ul/show-19797.html

免責聲明: 本文 Tgard 5000 A1 (o),T-gard 5000 A1 (o) 僅代表作者個人觀點，中國塑膠原料之家無關。中國塑膠原料之家網所轉載的內容，其版權均由原作者和資料提供方所擁有！如因作品版權問題需要處理，請與我們聯絡